KYMCO Dink-R 150 Manual page 5

1
. GENERAL INFORMATION
 Apply or add designated greases and
lubricants to the specified lubrication
points.
 After reassembly, check all parts for proper
tightening and operation.
 When two persons work together, pay
attention to the mutual working safety.
 Disconnect the battery negative (-) terminal
before operation.
 When using a spanner or other tools, make
sure not to damage the motorcycle surface.
After operation, check all connecting points,
fasteners, and lines for proper connection
and installation.
 When connecting the battery, the positive
(+) terminal must be connected first.
 After connection, apply grease to the
battery terminals.
 Terminal caps shall be installed securely.
1-4
Dink-R 150