KYMCO Dink-R 150 Manual page 138

9
. DRIVEN PULLEYS
Dink-R 150
Check the clutch lining for wear or damage.
Measure the clutch lining thickness.
Service Limit: 1.5 mm replace if below
DISASSEMBLY
Be sure to use a clutch spring compressor
to avoid spring damage.
Clutch / Driven pulley
Clutch spring compressor A120E00027
Set the clutch spring compressor onto a vise and
remove the clutch drive plate nut.
Loosen the clutch spring compressor and
disassemble the clutch/driven pulley assembly.
Remove the seal collar.
9-9