Front Wheel - KYMCO Dink-R 150 Manual

13
.
STEERING HANDLEBAR/FRONT WHEEL/
FRONT BRAKE/FRONT SHOCK ABSORBER/FRONT FORK

FRONT WHEEL

REMOVAL
Remove the front wheel off the ground.
Remove the front axle nut and pull out the axle.
Remove the front wheel.
INSPECTION
AXLE RUNOUT
Set the axle in V blocks and measure the runout
using a dial gauge.
The actual runout is 1/2 of the total indicator
reading.
Service Limit: 0.2mm replace if over
WHEEL RIM
Check the wheel rim run-out.
Service Limits:
Radial: 2.0mm replace if over
Axial: 2.0mm replace if over
13-5
Dink-R 150
Axle Nut
Axle Shaft