KYMCO Dink-R 150 Manual page 78

4
. LUBRICATION SYSTEM
Install the starter idle gear and starter clutch.
Install the gasket and dowel pins.
Hold the flywheel with the universal holder
and torque flywheel nut to specification with
a 14 mm socket wrench.
Torque: 5.0-6.0 kg-m
Special tool:
UNIVERSAL HOLDER: A120E00021
Install the right crankcase cover and tighten
the corresponding bolts.
Torque: 0.9 kg-m
＊
Diagonally tighten the bolts in 2 ～ 3
times.
4-9
Dink-R 150