KYMCO Dink-R 150 Manual page 49

2
. EXHAUST MUFFLER/FRAME COVERS
Remove the 3 screws attaching to the fuel
filler cap
Remove the inner cover.
Installation is in the reverse order of removal.
FRONT INNER FENDER
Remove the four fasteners, connect front
inner fender and the top inner fender
Remove the four fasteners, connect front
inner fender and the under cover.
Remove front inner fender
TOP INNER FENDER
Remove the two bolts.
Disconnect the connector of Fuel Pump and
ECU Relay、Headlight controller and Keyless
controller.
Remove the top inner fender
2-21
Front inner fender
Under cover
Fuel pump and ECU relay
Headlight controller bolts
Dink-R 150
screws
the top inner fender
fasteners
Keyless controller