KYMCO Dink-R 150 Manual page 106

6. ENGINE REMOVAL/INSTALLATION
ENGINE HANGER BRACKET
INSTALLATION
Install the engine hanger bracket to the engine.
Install and tighten the engine hanger
bracket bolts.
ENGINE INSTALLATION
Install the engine and tighten the engine
mounting bolts.
Torque: 5.0kg-m
Tighten the rear shock absorbers
mounting bolts.
Torque: Up side 4.0kg-m
Down side 2.5kg-m
Install the removed parts in the reverse order
of removal.
＊
Tire pressure should be checked
when tires are cold.
After installation, inspect and adjust the following:
•Throttle grip free play
•Fill the cooling system with coolant and start the
engine to bleed air from the system.
Engine Hanger Bolts
Dink-R 150
6-6