KYMCO Dink-R 150 Manual page 180

13
.
STEERING HANDLEBAR/FRONT WHEEL/
FRONT BRAKE/FRONT SHOCK ABSORBER/FRONT FORK
FRONT WHEEL BEARING
Remove the side collar(1) and dust seal(2).
Turn the inner race of each bearing with your
finger to see if they turn smoothly and quietly.
Also check if the outer race fits tightly in the hub.
Replace the bearings if the races do not turn
smoothly, quietly, or if they fit loosely in the hub.
Remove the front wheel bearing (3) by using
the special tool.
Special tool:
Bearing puller
Remove the distance collar from wheel.
Remove the front wheel bearing (4) by using
the special tool.
Special tool:
Bearing puller
ASSEMBLY
Install the front wheel bearing(3) (4) by using
the special tool.
Special tool:
Bearing puller
Install the distance collar.
A120E00037
A120E00037
A120E00014
Dink-R 150
(1) (2)
(3)
(4)
13-6