Vulcan-Hart VHG-C Series Operation Manual page 15

VHG SERIES GAS FRYERS
Programming Solid State Digital Control
1. Press the PROGRAM
LEFT TIMER button twice then the RIGHT TIMER
unlock and begin programming.
3. Press the PROGRAM
right timer displays. Press UP on the
PROGRAM button to increase time
and DOWN on the PROGRAM
button to decrease time.
6. Press the PROGRAM
melt mode displays. Press UP or
DOWN on the PROGRAM
to select L(liquid), S(solid) or OFF(no
melt cycle).
To prevent possible ignition of the shortening on start up, the melt mode must be set to solid
mode when using a solid shortening.
VULCAN
PROGRAMMING
If LOCKED, press
To UNLOCK
button. If LOCKED is displayed, quickly press the
button, the 4. Press the PROGRAM
compensating time displays. Press
UP or DOWN on the PROGRAM
button to change from Y(on) or N
(off).
button, the 7. Press the PROGRAM
beep volume level displays. Press UP
button or DOWN on the PROGRAM
button to adjust the level from 0-3.
-15-
2. Press the PROGRAM
button twice to left timer displays. Press UP on the
PROGRAM
and DOWN on the PROGRAM
button to decrease time.
button, the 5. Press the PROGRAM
temperature setting displays. Press
UP on the PROGRAM
increase temperature and DOWN on
the PROGRAM
button, the 8. Press the PROGRAM
language mode displays. Press UP or
DOWN on the PROGRAM
select ENG(English) SPA(Spanish) or
FRE(French). Spanish and French are
currently
button, the
button to increase time
button, the
button to
button to decrease.
button, the
button to
unavailable.
F-47678 Rev. A (3-20)