Vulcan-Hart VHG-C Series Operation Manual page 18

VHG SERIES GAS FRYERS
3. Press the 3 button, PRODUCT LIBRARY displays. Press UP or DOWN on the PROGRAM
through selections(ADD,EDIT,DELETE or EXIT).
a. To add a product, select ADD and press the CONFIRM
b. Type in the name of the product using the numbered buttons.
Use subscript characters shown at the bottom right of each numbered button circle. EXAMPLE: The subscript 2
button on the right button set timer pad is pressed three times to display the letter C in CHIPS.
c. Press LEFT AND RIGHT on the PROGRAM
d. Press the CONFIRM
e. WORKING will display while the new product is saved.
f. To delete a product, select DELETE by pressing UP and DOWN on the PROGRAM
LIBRARY DISPLAYS again and then press the CONFIRM
g. Press UP and DOWN on the PROGRAM
h. Press the CONFIRM
i. Press UP and DOWN on the PROGRAM
j. Press the CONFIRM
k. WORKING will display while the new product is deleted.
l. To edit a product, select EDIT by pressing UP and DOWN on the PROGRAM
DISPLAYS again and then press the CONFIRM
m. Press UP and DOWN on the PROGRAM
n. Press the CONFIRM
o. Use subscript characters shown at the bottom right of each numbered button circle. EXAMPLE: The 5
on the right button set timer pad is pressed four times to display the letter P in PICKLES.
p. Press LEFT AND RIGHT on the PROGRAM
q. To delete a letter, move the cursor to the letter and press the 9
˽
with the " " subscript character.
r. Press the CONFIRM
s. WORKING will display while the new product is saved.
VULCAN
button to move the cursor in the display window.
button to save and exit or the CANCEL
button to select the product to be deleted.
button, ARE YOU SURE ? will show on the display.
button to select YES or NO.
button to save and exit or the CANCEL
button.
button to select the product to be edited.
button.
button to move the cursor in the display window to edit characters.
button to save and exit or the CANCEL
-18-
button. NAME? will display.
button to exit without saving.
button.
button to exit without saving.
button when PRODUCT LIBRARY
button on the right button set timer pad
button to exit without saving.
button to cycle
button when PRODUCT
button
F-47678 Rev. A (3-20)