Advertisement
Available languages
Available languages
VHG SERIES GAS FRYERS
Programming Computer Control
To enter programming mode, press buttons in sequence
1. Center of PROGRAM button
2. LEFT arrow button
3. RIGHT arrow button
ADV USER SETTING will show on display. The red lights
will illuminate over buttons that contain control
parameter settings. There will be no response from the
buttons that are not illuminated.
Advanced User Setting Button Legend
Left Button Set-Basket Timer
1. Temperature
2. Melt Type
3. Product Library
4. Recipe Editor
5. Passcode
6. Beep Volume
7. Language
8. Setback
9. Dry Fire Test
1. Press the 1
button, SET TEMP displays and the
current temperature setpoint flashes. Press numbers on
left keypad to set desired temperature. Press the
CONFIRM
button to save and exit or the CANCEL
button to exit without saving.
To prevent possible ignition of the shortening on start up, the melt mode must be set to solid
mode when using a solid shortening.
VULCAN
If LOCKED, press
To UNLOCK
If LOCKED displays, press the far left 1,2,3,4 buttons in
sequence to unlock.
Right Button Set-Basket Timer
2. USB Option
4. Serial
9. Load Factory Defaults
2. Press the 2
or DOWN on the PROGRAM
LIQUID, NONE OR SOLID. Press the CONFIRM
to save and exit or the CANCEL
saving.
-17-
button, MELT TYPE displays. Press UP
button to select
button to exit without
F-47678 Rev. A (3-20)
button
Advertisement
