Table of Contents
Advertisement
Technical data
Installation instructions
Inlet and outlet runs
Connection cable length,
remote version
System pressure
Ambient temperature range
!
Storage temperature
Ambient class
Degree of protection
Shock resistance
Vibration resistance
CIP cleaning
SIP cleaning
Electromagnetic compatibility
(EMC)
106
11.1.7
Operating conditions: Installation
→ ä 12
There are no installation requirements regarding inlet and outlet runs.
max. 20 m (65 ft)
→ ä 13
11.1.8
Operating conditions: Environment
Sensor and transmitter:
• Standard: –20 to +60 °C (–4 to +140 °F)
• Optional: –40 to +60 °C (–40 to +140 °F)
Note!
• Install the device at a shady location. Avoid direct sunlight, particularly in warm climatic regions.
• At ambient temperatures below –20 °C (–4 °F) the readability of the display may be impaired.
–40 to +80 °C (–40 to +175 °F), preferably at +20 °C (+68 °F)
B, C, I
Standard: IP 67 (NEMA 4X) for transmitter and sensor
According to IEC 68-2-31
Acceleration up to 1 g, 10 to 150 Hz, following IEC 68-2-6
yes
yes
To IEC/EN 61326 and NAMUR recommendation NE 21
Proline Promass 84 MODBUS RS485
Endress+Hauser
Advertisement
Table of Contents
