Endress+Hauser Proline Promass 84 MODBUS RS485 Operating Instructions Manual page 111

Proline Promass 84 MODBUS RS485
Pressure loss (US units)
Endress+Hauser
Pressure loss coefficient for Promass A
DN
[mm] [inch]
1.8 ⋅ 10
2 1/12"
3.5 ⋅ 10
4 1/8"
High-pressure version
1.4 ⋅ 10
2 1/12"
3.0 ⋅ 10
4 1/8"
[mbar]
10000
1000
100
10
1
0.1
1
Fig. 55: Pressure loss diagram with water (1 = standard version, 2 = high-pressure version)
Pressure loss is dependent on the fluid properties and nominal diameter. Consult Endress+Hauser
for Applicator PC software to determine pressure loss in US units. All important instrument data is
contained in the Applicator software program in order to optimize the design of the measuring
system.
The software is used for the following calculations:
• Nominal diameter of the sensor with fluid characteristics such as viscosity, density, etc.
• Pressure loss downstream of the measuring point.
• Converting mass flow to volume flow, etc.
• Simultaneous display of various meter sizes.
• Determining measuring ranges.
The Applicator runs on any IBM-compatible PC with Windows.
d K
[m]
1.6 ⋅ 10
–3 10
9.4 ⋅ 10
–3 8
5.4 ⋅ 10
–3 10
2.0 ⋅ 10
–3 9
1 10
2
Technical data
K1 K2
2.4 ⋅ 10
10
0
2.3 ⋅ 10
9
0
6.6 ⋅ 10
10
0
4.3 ⋅ 10
9
0
DN 2
DN 4
100 1000
[kg/h]
a0006817
111