Operating Options; Operating Program "Fieldcare; Current Device Description Files - Endress+Hauser Proline Promass 84 MODBUS RS485 Operating Instructions Manual

Proline Promass 84 MODBUS RS485
!
Endress+Hauser
5.6

Operating options

5.6.1

Operating program "FieldCare"

FieldCare is Endress+Hauser's FDT-based plant asset management tool and allows the configuration
and diagnosis of intelligent field devices. By using status information, you also have a simple but
effective tool for monitoring devices. The Proline flowmeters are accessed via a service interface or
via the service interface FXA193 with Proline Adapter Cable.
5.6.2

Current device description files

The following table illustrates the suitable device description file for the operating tool in question
and then indicates where these can be obtained.
Operation via Service-Protokoll:
Valid for device software: 3.06.XX
Software release: 06.2010
Operating program/Device driver:
FieldCare/DTM
Tester/simulator:
Fieldcheck
Note!
The Fieldcheck tester/simulator is used for testing flowmeters in the field. When used in
conjunction with the "FieldCare" software package, test results can be imported into a database,
printed and used for official certification. Contact your Endress+Hauser representative for more
information.
→ DEVICE SOFTWARE function (8100)
How to acquire:
• www.endress.com → Download
• CD-ROM (Endress+Hauser order number: 56004088)
• DVD (Endress+Hauser order number: 70100690)
Sources for obtaining device descriptions:
• Update by means of FieldCare via flow device FXA 193/291 DTM in the
Fieldflash Module
Operation
47