Conductor Termination
Conductor Termination
7
7.1 Connect Conductor to CAGE CLAMP®
CAGE CLAMP
stranded and fine-stranded conductors.
Solid, stranded and fine-stranded conductors are terminated by pushing them into Push-
in CAGE CLAMP
used to open the Push-in CAGE CLAMP
connected to each clamping unit.
To connect a conductor, proceed as follows:
ü You need an operating tool.
1. Insert the operating tool into the rectangular opening above the connection to open
the CAGE CLAMP
2. Insert the conductor into the corresponding connection opening (round housing
opening).
3. Remove the operating tool again to close CAGE CLAMP
ð The conductor is now securely clamped.
50
System manual | Version: 3.0.2
®
- and Push-in CAGE CLAMP
®
Connectors. For all types of conductors, an operating tool must be
®
.
Connect a conductor to a CAGE CLAMP
®
Connectors are designed for solid,
®
®
and CAGE CLAMP
. Only 1 conductor may be
®
.
®
.
Connect a conductor to a CAGE CLAMP
Serie 750, 753
®
.