Audio Configuration - Barco C 5010S User Manual

How to view
1. With a Button plugged in or the ClickShare desktop app ready, click on the hamburger menu and select
View room display.
Image 3–26
The content of the meeting room display is transferred to a new window on your laptop. A red eye will be
shown at the bottom left on the meeting room display splash screen.
Image 3–27
3.9 Stop sharing and leave
With the ClickShare desktop app
When your meeting has come to an end, stop sharing by hovering over the red bar to expand the interface and
clicking the full red circle.
Disconnect from the meeting room by either clicking the "leave room" icon (see below) or by simply closing
your laptop.
Image 3–28 Leave meeting room
With a Button
Click the Button and unplug the Button from your laptop.

3.10 Audio configuration

Audio configuration
The connected user must control his own audio signal using the audio configuration of his computer. If he
does not want to broadcast his audio signal, he has to mute audio on his computer.
For some operating system, it is necessary to set ClickShare as your default output device. Once you unplug
the Button, the default setting is switched back to the previous setting. The speakerphone selection is also
selected.
Audio configuration
The following configuration is the expected configuration for the playback devices when plugging the Button.
ClickShare speaker as default device and room speakerphone as default communications device.
Getting started
R5900095 /05 CX-50 45