Lan Connection; Power Connection - Barco CX-20 Installation Manual

CX-20 Installation
When USB speakerphone is attached to the Base Unit, this will output all audio. Even if separate audio
system is attached for the content audio..
Sound is not sent out
In some Windows environments sound is not sent out. This can be solved as follow:
E.g. for Windows 7
1. Right click on the sound icon in the system tray and select Default communication device. The Sound
window opens.
2. Select Echo Cancelling Speakerphone, select Set default and click Apply.
E.g. for Windows 10
1. Click on the sound icon in the system tray and click on the arrow up to open possibilities.
2. Select the desired device.
What happens if you select the wrong audio device
• When you are sharing screen content and the audio goes through the speakerphone
- Audio will be played out in the room even when not sharing
- Audio will be transmitted low-latency, so there will be no lip-sync
- Due to aggressive jitter adaptation, the sound (esp. music) might not be 100% fixed tone
• When you use the ClickShare speaker in your UC&C call
- Audio will have additional delay
- Audio will not be outputted when you are not on screen, potentially giving you a false feeling of "ended
call" or "muted state"
• When you do not select the room speakerphone as microphone, but your laptop's microphone in
combination with a ClickShare Speaker or the room speakerphone:
- High probability of echo for remote participants!
- Bad microphone pickup in the room

4.13 LAN connection

About LAN connection
The Base Unit can be connected to a local network or directly to a laptop.
Maximum allowed LAN speed: 1000 Mbit
We do strongly advise the LAN connection and the use of XMS cloud for configuration, monitoring and
additional functionality. The LAN connection also greatly improves the user experience when using the
ClickShare Apps and native sharing protocols such as Airplay and others.
How to connect
1. Insert a network cable with RJ-45 connector into the LAN port.
2. Connect the other side to a LAN.

4.14 Power connection

About power
An external power adapter is delivered with the product. The output rate is 12 VDC 2A.
CAUTION: Once the Base Unit is powered, it starts up. Then the power button can be used to
switch on or off.
How to connect the external power adapter
1. Plug the barrel connector of the power adapter into the power input of the Base Unit.
38 R5900102 /04 CX-20