Figure 39 Control: Move Cartridges Screen - Quantum P4000 User Manual

Figure 39 Control:
Move Cartridges
Screen
About
System
Control: Move Cartridge
Off-line
Standby
Source:
Load Port
Destination:
Range:
O
Stop
2 Identify the source element of the cartridge to be moved. Proceed as
follows:
a Press the appropriate source element button (
,
Drive Load Port
Range field (below the Destination field) displays the range of
addresses.
b Using the keypad, enter the address of the source element and
then press the Destination input field. The Source information is
displayed in the Source field and the Destination field becomes
active.
3 Identify the destination for the cartridge:
a Press the appropriate destination element button (
,
Tape Drive Load Port
b Using the keypad, enter the address of the destination element
and then press the Execute button. The destination information is
displayed in the Destination text box and the move is initiated.
The GUI displays a
button.
Quantum P4000 and P7000 Libraries User's Guide
Backspace button:
Use this button to erase a partial
entry - character by character
Back Forward
Overview Tapes
_
Execute
, or ). When you press an element type, the
Gripper
, or ).
Gripper
Command In Progress
Chapter 3 Operator Commands
Moving Cartridges
Home
Operator
1 2
3 4
Storage Bin
5 6
Drive
7 8
Load Port
9 0
Gripper
PTM Select
,
Storage Bin
Storage Bin
dialog box with an
Abort
Tape
,
69