Chapter 3 Changing the Library Configuration
Changing a Tape Drive ID
Figure 38 ATL M2500
Drive Numbering
52
•
Drive 5 ID = 15
•
Drive 6 ID = 14
Figure 38
illustrates the drive numbering scheme for the ATL M2500.
To change a tape drive SCSI ID:
1 Access the
Configuration
Screen).
2 Press the
or
Up
Down
) is highlighted.
Drive 1 ID
3 Press
.
Select
4 Use the
or
Up
Down
settings are
through
0
Set the drive SCSI ID to
Caution:
installed in the library.
5 Press
.
Select
ATL M-Series User's Guide
screen (see
Accessing the Configuration
buttons until the desired drive ID (for example,
buttons to select the desired drive ID. Available
and
.
15
Disabled
Disabled
Drive 1 (default
SCSI ID = 1)
Drive 2 (default
SCSI ID = 2)
Drive 3 (default
SCSI ID = 3)
Drive 4 (default
SCSI ID = 4)
Drive 5 (default
SCSI ID = 15)
Drive 6 (default
SCSI ID = 14)
only if the drive is not