Running The Demo 6 Program - Quantum ATL M1500 User Manual

Chapter 7 Running the Demonstration Programs

Running the Demo 6 Program

Running the Demo 6 Program
100
The program causes the X, Y, and Theta axes to move randomly.
Demo 6
To run the program:
Demo 6
1 Access the
Demo Programs
Screen on page 93).
2 Press the or
Up Down
3 Press .
Select
The program starts.
Demo 6
4 To stop the program, press
The GUI displays a status screen listing the demonstration program
number, the number of cycles completed, and the status of the test:
pass or fail.
5 Press to return to the
Back
ATL M-Series User's Guide
screen (see Accessing the Demo Programs
buttons to select
Demo 6
.
Stop
Demo Programs
.
screen.
7