Changing The Storage Slot Count Setting - Quantum ATL M1500 User Manual

Changing the Storage Slot Count Setting

The
Storage Slot Count
reported to the SCSI host.
When changing this option setting in a multiple library stack,
Note:
you must use the GUI on the SCSI master (the library module
connected to the SCSI host) in order for the change to take
effect.
To change the
Storage Slot Count
1 Access the
Configuration
Screen on page 49).
2 Press the or
Up Down
3 Press .
Select
4 Use the or
Up Down
setting. The available settings are:
• (all storage elements detected by the library are reported
Default
to the SCSI host)
• Any value from
library (this number varies depending on the library, the tape
drive type, and the setting of the
options)
The default setting is
Note:
5 Press .
Select
To return to the
Configuration
setting, press
Cancel
6 Press to return to the main screen.
Main
You must reboot the library before this setting will take
Note:
effect.
ATL M-Series User's Guide
Chapter 3 Changing the Library Configuration
Changing the Storage Slot Count Setting
option controls how many storage elements are
setting:
screen (see Accessing the Configuration
buttons until
Storage Slot Count
buttons to select the desired
through the number of storage elements in the
1
Import/Export
.
Default
screen without changing the option
.
3
is highlighted.
Storage Slot Count
and
Auto Clean
55