Quantum ATL M1500 User Manual page 145

FSC Name
261B FSC_SERVO_HAND_
SENSOR_FAILURE
261C FSC_SERVO_PICKER_
UNABLE_TO_ENGAGE
261D FSC_SERVO_PICKER_
AXIS_JAMMED
261E FSC_SERVO_PICK_
ACTION_STALLED
261F FSC_SERVO_SHUTTLE_
SENSOR_FAILURE
2620 FSC_SERVO_NVR_
SHUTTLE_DATA_
INVALID
2621 FSC_SERVO_X_AXIS_
JAMMED
2622 FSC_SERVO_FAILED_
TO_RAISE_DRIVE_HUB
2623 FSC_SERVO_
CARTRIDGE_STILL_
LATCHED
Appendix B Fault Symptom Code (FSC) Dictionary
Description
The pick action
'completed' with no
cartridge detected in
the hand
The pick action
'completed' with no
cartridge detected in
the hand
The Picker will not
move in either
direction
The Picker could not
get the cartridge to its
required position
The box's shuttle
sensor was not
detected during shuttle
calibration
Shuttle NVR data has
been corrupted, or not
yet initialized
The X axis cannot be
moved properly in
either direction
The drive hub could
not be raised into
position on cartridge
load
The cartridge is still
being retained by the
drive
ATL M-Series User's Guide
FRU Name Confidence %
127