Configuring The Mailbox - Quantum ATL M1500 User Manual

Chapter 2 Basic Operations
Using the Mailbox
Configuring the
2
Mailbox
34
Exporting a Cartridge in 1-Slot Mode
To export a cartridge in 1-slot mode:
1 Use the backup software to export a cartridge to the first slot of the
top left magazine.
2 On the main screen, press
The GUI displays the
3 Press .
Open
The GUI displays the
4 Press the button next to the top left magazine access door and open
the door.
5 Pull the magazine forward until it stops.
6 Remove the exported cartridge from the magazine.
7 Reinsert the magazine into the library.
8 Close the magazine access door.
9 On the
Mailbox - OPEN
The library locks the magazine access door.
By default, the
Import/Export
1 On the main screen, press
The GUI displays the
2 On the screen, press
Mailbox
The GUI displays the
option highlighted.
3 Use the and
Up Down
setting. The available settings are
LTO libraries), and
The default setting is
Note:
these settings, see
page 64.
ATL M-Series User's Guide
.
Mailbox
screen (see
Mailbox
screen (see
Mailbox - OPEN
screen, press
Re-Lock
option is set to
MAP
.
Mailbox
screen (see
Mailbox
.
Config
screen, with the
Configuration
buttons to select the desired
,
None 1-Slot
.
MAP
. For more information about
MAP
Changing the Import/Export Setting
figure 22).
figure 23).
.
. To change this setting:
figure 22).
Import/Export
Import/Export
, (or
10-Slot 12-Slot
2
in
on