Chapter 3 Changing the Library Configuration
Changing the Emulation Setting
Changing the Emulation Setting
54
The
option allows you to set the library to act as either a
Emulation
Quantum ATL library or an M4 Data library.
To set the emulation:
1 Access the
Configuration
Screen
on page 49).
2 Press the
or
Up
Down
3 Press
.
Select
4 Use the
or
Up
Down
The available settings are
The default setting for the ATL M1500 is
Note:
default setting for the ATL M2500 is
5 Press
.
Select
To return to the
Configuration
setting, press
Cancel
6 Press
to return to the main screen.
Main
You must reboot the library before this setting will take
Note:
effect.
ATL M-Series User's Guide
screen (see
Accessing the Configuration
buttons until
Emulation
buttons to select the desired
,
ATL M2500
ATL 1500
screen without changing the option
.
is highlighted.
setting.
Emulation
, and
.
M4 Data
; the
M4 Data
.
ATL M2500
3