Table 3 Front Panel Features - Quantum ATL M1500 User Manual

Table 3 Front Panel
Features
Feature Description
Operator The operator control panel consists of the following elements:
control panel
• Graphical user
interface (GUI)
• Five GUI
buttons
• Magazine
door buttons
• Light emitting
diode (LED)
indicators
Magazine These doors protect the data cartridge magazines.
access doors
Viewing This window allows you to view the library robotics while the library is
window operating.
The GUI displays library status information and allows
you to access the library menus. These menus allow you to
view or change the library settings, run demonstration
programs, or run diagnostic tests.
The GUI is discussed in detail in this book.
Use these buttons in combination with the GUI to scroll
through screens and select options or commands. The
functionality of these buttons changes depending on the
currently displayed GUI screen.
Pressing these buttons opens the magazine doors, if the
magazines have already been released using the
option on the GUI (see
page 35).
The operator control panel has two LED indicators:
• The green LED lights when the library is fully
operational and ready to accept host commands. It
flashes while the library is transitioning from a READY
state to a NOT READY state. The library will not be
READY during power-on self-tests, when magazines
are being released, or during access to certain menu
items.
• The red LED lights when there is a library error.
• Both LEDs flash when there is a library fault that
requires operator attention.
ATL M-Series User's Guide
Chapter 1 Overview
Removing the Magazines
Library Features
Mags
on
7