Chapter 3 Changing the Library Configuration
Changing the Auto-Import Option
Changing the Auto-Import Option
68
The
option controls how cartridges are moved from the
Auto-Import
import/export slots of the mailbox to the magazine slots:
•
Enabling this option causes the library to move any cartridges in the
import/export slots to the first (lowest element address) free
magazine slots automatically. The move is performed automatically
(without need for host commands) at both power-up and whenever
the import/export magazine is inserted.
•
Disabling this option removes the above capability; the host software
must issue SCSI commands to move cartridges from the import/
export slots to the required magazine slots.
To change the
Auto-Import
1 Access the
Configuration
Screen
on page 49).
2 Press the
or
Up
Down
3 Press
.
Select
4 Use the
or
Up
Down
The available settings are
The default setting is
Note:
5 Press
.
Select
To return to the
Configuration
setting, press
Cancel
6 Press
to return to the main screen.
Main
You must reboot the library before this setting will take
Note:
effect.
ATL M-Series User's Guide
setting:
screen (see
Accessing the Configuration
buttons until
Auto-Import
buttons to select the desired
or
Enabled
Disabled
.
Disabled
screen without changing the option
.
is highlighted.
setting.
Auto-Import
.
3