Cleaning A Tape Drive; Figure 41 Sample Select Cleaning Cartridge Screen - Quantum ATL M1500 User Manual

Cleaning a Tape Drive

Figure 41 Sample
Select Cleaning
Cartridge Screen
To clean a tape drive:
1 Access the
Maintenance
Screen).
2 Press .
Clean
The GUI displays the
A flashing arrow indicates the currently selected source element.
3 If the library is an ATL M1500 in a multiple library stack or an
ATL M2500, press the
cleaning cartridge is located.
4 Press the and
Up Down
contains the cleaning cartridge.
5 When the flashing arrow is next to the source element that contains
the cleaning cartridge, press
The GUI displays the
flashing arrow indicates the currently selected drive.
ATL M-Series User's Guide
Chapter 4 Performing Maintenance Operations
screen (see Accessing the Maintenance
Select Cleaning Cartridge
button to select the level where the
Level
buttons to select the source element that
.
Select
screen (see
Select Tape Drive
Cleaning a Tape Drive
4
screen (see figure 41).
figure 42). A
71