Chapter 3 Changing the Library Configuration
Changing the Sync Negotiation Setting
Changing the Sync Negotiation Setting
56
The
Sync Negotiation
negotiates synchronous data transfer mode. Normally, this negotiation is
performed by the host.
This option does not enable or disable synchronous data
Note:
transfers; it only controls the ability of the library to negotiate
for such transfers.
To enable or disable
Sync Negotiation
1 Access the
Configuration
Screen
on page 49).
2 Press the
or
Up
Down
3 Press
.
Select
4 Use the
or
Up
Down
setting. The available settings are
The default setting is
Note:
5 Press
.
Select
To return to the
Configuration
setting, press
Cancel
6 Press
to return to the main screen.
Main
ATL M-Series User's Guide
option controls whether the library robotics
:
screen (see
Accessing the Configuration
buttons until
Sync Negotiation
buttons to select the desired
Enabled
.
Enabled
screen without changing the option
.
is highlighted.
Sync Negotiation
and
.
Disabled
3