Changing The Auto-Clean Setting - Quantum ATL M1500 User Manual

Chapter 3 Changing the Library Configuration

Changing the Auto-Clean Setting

Changing the Auto-Clean Setting
66
4 Use the or
Up Down
The available settings are
libraries), and
MAP
The default setting is
Note:
5 Press .
Select
To return to the
Configuration
setting, press
Cancel
6 Press to return to the main screen.
Main
You must reboot the library before this setting will take
Note:
effect.
To enable or disable
Auto-Clean
1 Access the
Configuration
Screen on page 49).
2 Press the or
Up Down
3 Press .
Select
4 Use the or
Up Down
The available settings are
The default setting is
Note:
5 Press .
Select
To return to the
Configuration
setting, press
Cancel
ATL M-Series User's Guide
buttons to select the desired
, ,
None 1-Slot 10-Slot
.
.
MAP
screen without changing the option
.
:
screen (see Accessing the Configuration
buttons until
Auto-Clean
buttons to select the desired
or
Enabled Disabled
.
Disabled
screen without changing the option
.
setting.
Import/Export
(or in LTO
12-Slot
is highlighted.
setting.
Auto-Clean
.
3