Changing The Serialization Setting; Changing The Short Labels Setting - Quantum ATL M1500 User Manual

Chapter 3 Changing the Library Configuration

Changing the Serialization Setting

Changing the Serialization Setting

Changing the Short Labels Setting

58
The option controls how the library returns the tape drive
Serialization
serial number when a
When is set to
Serialization
a format compatible with Quantum ATL Prism products. When
is set to
Serialization Off
vendor unique format. This setting is only valid when
or
ATL M2500 ATL 1500
To enable or disable drive serialization:
1 Access the
Configuration
Screen on page 49).
2 Press the or
Up Down
3 Press .
Select
4 Use the or
Up Down
The available settings are
The default setting is
Note:
5 Press .
Select
To return to the
Configuration
setting, press
Cancel
6 Press to return to the main screen.
Main
The option controls how many bar code label characters are
Short Labels
returned when the host issues a
is set to:
Short Labels
• , all of the bar code label characters are returned
Off
• , only the first six characters of the bar code label are returned
On
ATL M-Series User's Guide
is requested.
Read Element Status
, the tape drive serial number is returned in
On
, the tape drive serial number is returned in a
(see Changing the Emulation Setting
screen (see Accessing the Configuration
buttons until
Serialization
buttons to select the desired
and
Enabled Disabled
.
Disabled
screen without changing the option
.
Read Element Status
is set to
Emulation
on page 54).
is highlighted.
setting.
Serialization
.
command. When
3
3