Updating The Drive Firmware From Tape; Figure 58 Select Firmware Cartridge Screen - Quantum ATL M1500 User Manual

Updating the Drive Firmware from Tape

Figure 58 Select
Firmware Cartridge
Screen
To update the drive firmware from tape:
1 Insert the drive firmware cartridge into the library and move it to the
desired storage element (see
page 29).
2 Access the Service Drive screen (see
Screen).
3 Press .
Update
The GUI displays the
A flashing arrow indicates the currently selected source element.
4 If the library is an M1500 in a multiple library stack or an M2500,
press the button to select the level where the drive firmware
Level
cartridge is located.
5 Press the and
Up Down
contains the drive firmware cartridge.
6 When the flashing arrow is next to the source element that contains
the drive firmware cartridge, press
The GUI displays the
flashing arrow indicates the currently selected drive.
ATL M-Series User's Guide
Chapter 6 Updating Drive Firmware
Updating the Drive Firmware from Tape
Importing and Exporting Cartridges
Accessing the Service Drive
Select Firmware Cartridge
buttons to select the source element that
.
Select
screen (see
Select Tape Drive
6
on
screen (see figure 58).
figure 59). A
91