Quantum ATL M1500 User Manual page 49

11 If you removed a data cartridge from the mailbox, replace it:
Repeat steps 1
a
Reinsert the data cartridge you removed in
b
mailbox.
Reinsert the magazine into the library.
c
Close the magazine access door.
d
On the
e
Mailbox
The magazine access door locks.
Exporting a Cartridge in MAP Mode
To export a cartridge in MAP mode:
1 If there is currently a data cartridge in the mailbox, remove it:
On the main screen, press
a
The GUI displays the
Press .
b
Open
The GUI displays the
Press the button next to the top left magazine access door and
c
open the door.
Pull the magazine forward until it stops.
d
Remove the data cartridge from the mailbox.
e
Reinsert the magazine into the library.
f
Close the magazine access door.
g
On the
h
Mailbox - OPEN
The library locks the magazine access door and inventories the
mailbox.
2 Use the command on the
Move
you wish to export to the mailbox.
3 Repeat steps 1a through
4 Remove the exported cartridge from the mailbox.
5 Reinsert the data cartridge you removed in
mailbox.
ATL M-Series User's Guide
through 4 to open the mailbox again.
screen, press
Re-Lock
.
Mailbox
screen (see
Mailbox
Mailbox - OPEN
screen, press
screen to move the cartridge
Mailbox
1d to open the mailbox again.
Chapter 2 Basic Operations
Using the Mailbox
step 5 into the
.
figure 22).
screen (see figure 23).
.
Re-Lock
step 1e (if any) into the
2
31