Changing the Terminator Power Setting
To return to the
Configuration
setting, press
Cancel
6 If desired, repeat steps
drive.
7 Press
to return to the main screen.
Main
You must reboot the library before this setting will take
Note:
effect.
The
Terminator Power
provide terminator power.
To enable or disable robotics terminator power:
1 Access the
Configuration
Screen).
2 Press the
or
Up
Down
3 Press
.
Select
4 Use the
or
Up
Down
setting. Available settings are
The default setting is
Note:
5 Press
.
Select
To return to the
Configuration
setting, press
Cancel
6 Press
to return to the main screen.
Main
You must reboot the library before this setting will take
Note:
effect.
ATL M-Series User's Guide
Chapter 3 Changing the Library Configuration
Changing the Terminator Power Setting
screen without changing the option
.
2
through
5
to set the ID for another tape
option controls whether the library robotics
screen (see
Accessing the Configuration
buttons until
Terminator Power
buttons to select the desired
and
Enabled
.
Enabled
screen without changing the option
.
is highlighted.
Terminator Power
.
Disabled
3
53