Running The Demo 4 Program - Quantum ATL M1500 User Manual

Chapter 7 Running the Demonstration Programs

Running the Demo 4 Program

Running the Demo 4 Program
98
The program causes the robot to pick a randomly selected
Demo 4
cartridge from its magazine slot and place it in another randomly selected
magazine slot.
This program is for multiple library stacks only.
Note:
To run the program:
Demo 4
1 Verify that at least:
• Two library modules are installed in the stack
• One magazine is installed in each library module
• One cartridge is present
2 Access the
Demo Programs
Screen on page 93).
3 Press the or
Up Down
4 Press .
Select
The program starts. This program continues until you press
Demo 4
the button.
Stop
5 To stop the program, press
The GUI displays a status screen listing the demonstration program
number, the number of cycles completed, and the status of the test:
pass or fail.
6 Press to return to the
Back
ATL M-Series User's Guide
screen (see Accessing the Demo Programs
buttons to select
Demo 4
.
Stop
Demo Programs
.
screen.
7