Changing The Illumination Setting - Quantum ATL M1500 User Manual

Changing the Illumination Setting

To enable or disable
Short Labels
1 Access the
Configuration
Screen on page 49).
2 Press the or
Up Down
3 Press .
Select
4 Use the or
Up Down
The available settings are
The default setting is
Note:
5 Press .
Select
6 To return to the
Configuration
setting, press
Cancel
7 Press to return to the main screen.
Main
The option allows you to turn the interior illumination of the
Illumination
library on or off. This illumination allows you to view the robotics easily
through the viewing window.
To enable or disable
Illumination
1 Access the
Configuration
Screen on page 49).
2 Press the or
Up Down
3 Press .
Select
4 Use the or
Up Down
The available settings are
The default setting is
Note:
ATL M-Series User's Guide
Chapter 3 Changing the Library Configuration
Changing the Illumination Setting
:
screen (see Accessing the Configuration
buttons until
Short Labels
buttons to select the desired
and
Enabled Disabled
.
Disabled
screen without changing the option
.
:
screen (see Accessing the Configuration
buttons until
Illumination
buttons to select the desired
and
Enabled Disabled
.
Enabled
is highlighted.
setting.
Short Labels
.
is highlighted.
setting.
Illumination
.
59
3