Running the Move Medium Test
Figure 50 Sample
Move Cartridge FROM
Screen
The
test simulates the movements performed when a SCSI
Move Medium
command is received via the SCSI interface.
Move Medium
To run the
Move Medium
1 Access the
Diagnostics Menu
Menu Screen
on page 77).
2 Press the
and
Up
Down
3 Press
.
Select
The GUI displays the
4 Press the
or
Up
Down
5 Press
.
Select
The GUI displays the
flashing arrow indicates the currently selected source element.
6 If the library is an ATL M1500 in a multiple library stack or an
ATL M2500, press the
desired source element is located.
7 Press the
and
Up
Down
cartridge.
ATL M-Series User's Guide
Chapter 5 Running Diagnostic Programs
Running the Move Medium Test
test:
screen (see
Accessing the Diagnostics
buttons to select
General
screen (see
Diags: General
buttons to select
Move Medium
Move Cartridge FROM
button to select the level where the
Level
buttons to select the source element of the
.
figure
48).
.
screen (see
figure
50). A
5
81