Running The Display Test - Quantum ATL M1500 User Manual

Running the Display Test

13 Press .
Back
The GUI displays the cycle count screen.
14 Press , then
Cancel
The allows you to verify that the GUI has no missing pixels
Display Test
and that the two status indicators on the library front panel work
correctly.
To run the
Display Test
1 Access the Diagnostics Menu screen (see
Menu Screen on page 77).
2 Press the and
Up Down
3 Press .
Select
The GUI displays the
4 Press the and
Up Down
5 Press .
Select
The test starts. The GUI goes dark momentarily, and both of the
status indicators flash. This test lasts approximately three seconds.
ATL M-Series User's Guide
Chapter 5 Running Diagnostic Programs
to return to the
Back Diags: General
:
buttons to select
screen (see
Diags: General
buttons to select
Running the Display Test
screen.
Accessing the Diagnostics
.
General
figure 48 on page 79).
.
Display Test
5
87