01/FORK, TRIPLE CLAMP
Checking the fork legs
4.6
–
Pull inner tube
Info
If the damping bush
201180-10
–
Remove lock ring
–
Remove seal ring
–
Remove washer
201181-10
–
Remove washer
201182-10
Condition
The fork legs are disassembled.
–
Check the inner tube
»
If there is damage:
–
Change the inner tube.
–
Check the outer tube
»
If there is damage:
–
Change the outer tube.
–
Check the spring length.
Guideline
201190-10
Spring length with preload bush(es)
»
If the measured value is greater than the specified value:
–
Reduce the thickness of the preload spacer.
»
If the measured value is less than the specified value:
–
Increase the thickness of the preload spacer.
–
Measure the outside diameter at several locations on the inner tube.
Outside diameter of the inner tube
»
If the measured value is less than the specified value:
–
Change the inner tube.
200684-10
with piston rod
out of the outer tube.
remains in the outer tube, remove it as well.
.
.
.
from the outer tube.
for damage.
for damage.
347... 353 mm (13.66... 13.9 in)
31.936... 31.975 mm (1.25732...
1.25886 in)
12