Removing The Engine Sprocket - KTM 50 SX 2010 Repair Manual

30/DISASSEMBLING THE ENGINE

Removing the engine sprocket

15.13
–
Remove distance sleeve
300476-10
–
Mount special tool
by screwing in the screw.
Extractor (46129021000) (
300477-10
(50 SX)
–
Hold the rotor in place with special tool
Holding spanner, rotor (45229012000) (
–
Remove nut
300853-10
–
Mount special tool
by screwing in the screw.
Extractor (46129021000) (
300854-10
–
Remove lock ring
300479-10
.

on the rotor, apply counterpressure, and pull off the rotor

p. 144)

and the washer of the rotor.

on the rotor, apply counterpressure, and pull off the rotor

p. 144)
. Take off the engine sprocket.

.
p. 143)
71