Installing The Lower Triple Clamp - KTM 50 SX 2010 Repair Manual

01/FORK, TRIPLE CLAMP

Installing the lower triple clamp

4.10
–
Remove nut
300739-10
–
Remove protector ring
–
Remove the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
300740-10
–
Clean the bearing and sealing elements, check for damage, and grease.
Long-life grease (
–
Insert the lower triple clamp with the steering stem. Mount the upper steering head
bearing.
Info
Check that the O-rings of the steering head seal are correctly positioned.
400563-01
–
Push on protective ring
–
Mount and tighten nut
Guideline
Steering head nut
300739-11
–
Position the upper triple clamp.
–
Mount nut

Guideline
Nut, steering stem
300738-10
–
Position the fork leg.
–
Adjust fork overhang
Guideline
Upper fork projection
–
Tighten screw
Guideline
Screw, top triple clamp
300741-10
.

.

p. 140)
.

.

, but do not tighten it yet.
.

.

M20x1.5 10 Nm (7.4 lbf ft)
M20x1.5 10 Nm (7.4 lbf ft)
10... 17 mm (0.39... 0.67 in)
M8 25 Nm
(18.4 lbf ft)
16