31/CARBURETOR
Checking the choke slide (50 SX)
18.11
Checking the choke slide (50 SX Mini)
18.12
–
Position the float chamber.
–
Mount and tighten screws
Guideline
Other screws, carburetor
300917-11
–
Mount the fuel hose on the carburetor.
300916-10
–
Position the jet needle in the throttle slide.
300923-10
Condition
The choke slide has been removed.
–
Check the choke slide for smooth operation.
»
If the choke slide is difficult to move or is dirty:
–
Clean the choke slide and check its activation.
Carburetor cleaner (
–
Check the piston of the choke slide for damage and wear.
»
If the piston of the choke slide is damaged or worn:
–
Change the choke slide.
–
Check the rubber sleeve and lock.
300912-10
»
If the rubber sleeve is damaged or brittle, or if the lock is not functioning:
–
Change the choke slide.
Condition
The choke slide has been removed.
–
Check the choke slide for smooth operation.
»
If the choke slide is difficult to move or is dirty:
–
Clean the choke slide and check its activation.
Carburetor cleaner (
–
Check the piston of the choke slide for damage and wear.
»
If the piston of the choke slide is damaged or worn:
–
Change the choke slide.
–
Check the rubber sleeve and lock.
300922-10
.
M4
p. 140)
p. 140)
105
2 Nm (1.5 lbf ft)