6
FORK, TRIPLE CLAMP
6.10
Checking the fork legs
Condition
Fork disassembled.
–
Check the inner tube and axle clamp for damage.
»
If there is damage:
–
Change the inner tube.
202134-10
–
Measure the outside diameter at several locations on the inner tube.
Outside diameter of inner tube
»
If the measured value is less than the specified value:
–
Change the inner tube.
200684-10
–
Measure the run-out of the inner tube.
Run-out of inner tube
»
If the measured value is greater than the specified value:
–
Change the inner tube.
200685-10
–
Check the outer tube for damage.
»
If there is damage:
–
Change the outer tube.
202112-10
–
Check the surface of the sliding bushings.
»
If the bronze-colored layer
–
Replace the sliding bushings.
200665-10
47.975... 48.005 mm (1.88878...
1.88996 in)
≤ 0.20 mm (≤ 0.0079 in)
under the sliding layer
21
is visible: