30/Assembling The Engine; Installing The Crankshaft; Installing The Transmission Shafts; Installing The Left Engine Case - KTM 50 SX 2010 Repair Manual

30/ASSEMBLING THE ENGINE

Installing the crankshaft

17.1

Installing the transmission shafts

17.2

Installing the left engine case

17.3
–
Clamp the right section of the engine case into the engine work stand.
–
Slide crankshaft
engine case.
300501-10
–
Push both transmission shafts
300500-10
–
Mount engine case gasket
Info
The axial play cannot be adjusted.
300499-11
–
Mount the left section of the engine case.
–
Mount screws
Guideline
Screw, engine case
–
Mount screw
Guideline
Screw, engine case
–
Mount screw
300498-12
Guideline
Screw, engine case
–
Mount screws
Guideline
Screw, engine case
–
Mount distance bushing
all the way into the bearing seat of the right section of the

into the bearing seats together.

and dowels
 
but do not tighten yet.

but do not tighten yet.

but do not tighten yet.

and tighten all screws in a crisscross pattern.

with the chamfer facing inward.

.
M6x40 10 Nm (7.4 lbf ft)
M6x35 10 Nm (7.4 lbf ft)
M6x55 10 Nm (7.4 lbf ft)
M6x30 10 Nm (7.4 lbf ft)
84