6
FORK, TRIPLE CLAMP
6.12
Disassembling the compression holder
Info
The steps are identical for both fork legs.
6.13
Checking the fork legs
–
Remove spring
–
Remove valve
–
Take out the piston rod.
200701-10
Preparatory work
–
Disassemble the fork legs. (
Main work
–
Clamp the compression holder in a bench vise using soft jaws.
–
Remove nut
–
Remove the spring.
–
Remove washer
200702-10
–
Remove piston
–
Remove shim stack
200703-10
–
Remove O-ring
–
Extract the compression holder.
200704-10
Condition
The fork has been disassembled.
–
Check the inner tube and axle clamp for damage.
»
If there is damage:
–
Change the inner tube.
200728-10
.
bl
of the rebound damping together with the spring.
bm
p. 15)
.
1
.
2
.
3
.
4
and seal ring
from the compression holder.
5
6
20