Substances - KTM 50 SX 2010 Repair Manual

SUBSTANCES

2-stroke engine oil
According to
–
JASO FC ( p. 149)
Guideline
–
Only use high quality 2-stroke engine oil of a well-known brand. KTM recommends Motorex
Fully synthetic
Supplier
®
Motorex
–
Cross Power 2T
Brake fluid DOT 4 / DOT 5.1
According to
–
DOT
Guideline
–
Use only brake fluid that complies with the specified standards (see specifications on the container) and that possesses the corre-
sponding properties. KTM recommends Castrol and Motorex
Supplier
Castrol
–
RESPONSE BRAKE FLUID SUPER DOT 4
®
Motorex
–
Brake Fluid DOT 5.1
Coolant
Guideline
–
Use only suitable coolant (also in countries with high temperatures). Use of low-quality antifreeze can lead to corrosion and foam-
ing. KTM recommends Motorex
Mixture ratio
Antifreeze protection: −25... −45 °C (−13...
−49 °F)
Coolant (mixed ready to use)
Antifreeze
Supplier
®
Motorex
–
Anti Freeze
Fork oil (SAE 7.5)
According to
–
SAE ( p. 149) (SAE 7.5)
Guideline
–
Use only oils that comply with the specified standards (see specifications on the container) and that possess the corresponding
properties. KTM recommends Motorex
Supplier
®
Motorex
–
Racing Fork Oil
Gear oil (ATF Dexron 3)
According to
–
Dexron III (ATF Dexron 3)
Guideline
–
Use only ATF gear oils that comply with the specified standards (see specifications on the container) and that possess the corre-
sponding properties. KTM recommends Motorex
Supplier
®
Motorex
–
ATF Dexron 3
®
®
products.
50 % corrosion inhibitor/antifreeze
50 % distilled water
−40 °C (−40 °F)
®
products.
®
products.
products.
®
products.
138