Filling Up With Oil (50 Sx Mini); Bleeding Oil Pump (50 Sx Mini) - KTM 50 SX 2010 Repair Manual

Table of Contents

Advertisement

38/LUBRICATION SYSTEM

Filling up with oil (50 SX Mini)

21.6
Warning
Engine failure If the vehicle is run without 2-stroke oil in the tank, the result is engine failure.
The oil tank must always be filled up to the MIN mark.

Bleeding oil pump (50 SX Mini)

21.7
Danger
Danger of poisoning Exhaust gases are poisonous and inhaling them may
result in unconsciousness and/or death.
When running the engine, always make sure there is sufficient ventila-
tion, and do not start or run the engine in an enclosed space without an
effective exhaust extraction system.
Start the engine and check that it is oil-tight.
Switch off the engine.
Open the oil tank cap.
Fill the oil tank at least up to the MIN mark
Guideline
MIN mark
Oil tank contents
ca.
Close the oil tank cap.
700518-01
Condition
Fuel tank removed.
Pull off the oil line
300650-10
Fill the oil line with a syringe.
2-stroke engine oil (
300652-10
Connect the oil line
300650-10
.
Sufficient for a single tank filling
0.2 l (0.2 qt.)
2-stroke engine oil (
.
p. 138)
.
117
p. 138)

Advertisement

Table of Contents
loading

This manual is also suitable for:

50 sx mini 2010

Table of Contents