Installing The Fork Legs; Servicing Fork - KTM 50 SX 2010 Repair Manual

01/FORK, TRIPLE CLAMP

Installing the fork legs

4.3

Servicing fork

4.4
–
Position the fork legs.
–
Adjust fork overhang
Guideline
Upper fork projection
300734-10
–
Tighten screw
Guideline
Screw, top triple clamp
–
Tighten screws
Guideline
Screw, bottom triple clamp
300733-11
–
Position the brake caliper, fit and tighten the screws
Guideline
Screw, front brake caliper
300732-11
–
Position the brake line. Put the clamp on, and mount and tighten screws
–
Install the start number plate. (
–
Install the front wheel. (
300731-11
Condition
The fork legs have been removed.
.

10... 17 mm (0.39... 0.67 in)
.

M8
.

M6
M8
p. 44)
p. 46)
25 Nm
(18.4 lbf ft)
10 Nm (7.4 lbf ft)
with washers.

20 Nm Loctite ® 243™
(14.8 lbf ft)
.

10