31/CARBURETOR
Installing the carburetor (50 SX)
18.3
–
Unscrew hose clip
–
Pull the carburetor out of the intake flange.
–
Pull the carburetor forward out of the carburetor connection boot.
300900-10
–
Remove screw
–
Remove the throttle slide cover and pull the throttle slide out of the carburetor.
–
Drain the remaining fuel.
300901-10
–
Pull back spring retainer
–
Detach the throttle cable.
300902-10
–
Attach throttle cable
–
Position the spring retainer and throttle slide spring.
300895-11
–
Position the throttle slide, gasket, and throttle slide cover.
–
Mount and tighten screws
Guideline
Screw, throttle slide cover
300893-11
–
Mount the carburetor.
–
Position and tighten hose clamp
–
Mount the engine breather hose and position clamp
300892-10
.
.
and the throttle slide spring.
.
.
M5
.
3 Nm (2.2 lbf ft)
.
96