Table of Contents
Advertisement
01/FORK, TRIPLE CLAMP
Assembling the fork legs
4.7
Info
The operations are the same on both fork legs.
The only difference between the two fork legs lies in the piston ring of the piston rod, which is only mounted on the left fork
leg.
–
Measure the run-out of the inner tube.
Inner tube run-out
»
If the measured value is greater than the specified value:
–
Change the inner tube.
200685-10
–
Position washer
201184-10
–
Mount washer
–
Lubricate seal ring
Lubricant (T511) (
–
Mount lock ring
201181-11
–
Slide piston rod
–
Position damping bush
–
Slide the inner tube with the piston rod into the outer tube.
201180-11
–
Mount and tighten screw
Guideline
Screw, piston rod
Info
The washer and damping bush are centered by the screw.
To prevent the piston rod from turning, pull out the inner tube.
201179-11
≤ 0.10 mm (≤ 0.0039 in)
in the outer tube with the collar facing forward.
.
and press it in all the way.
p. 140)
.
into inner tube
.
.
with the seal ring.
M8x1.25
13
30 Nm
(22.1 lbf ft)
Advertisement
Table of Contents
