05/Exhaust; Removing The Exhaust Manifold; Installing The Exhaust Manifold; Removing Main Silencer - KTM 50 SX 2010 Repair Manual

05/EXHAUST

Removing the exhaust manifold

7.1
Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down. Do not touch hot components.

Installing the exhaust manifold

7.2

Removing main silencer

7.3
Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down. Do not touch hot components.
–
Remove springs
Spring hooks (50305017000) (
–
Remove screw
300615-10
–
Remove screws
–
Remove the exhaust manifold.
300616-10
–
Grease the O-ring of the exhaust manifold.
Long-life grease (
–
Position the exhaust manifold.
–
Mount springs
Spring hooks (50305017000) (
–
Mount and tighten screw
Guideline
300615-10
Remaining screws, chassis
–
Mount and tighten screws
Guideline
Remaining screws, chassis
300616-10
.

p. 144)
.

.

p. 140)
.

p. 144)
.

M6
.

M6
38
10 Nm (7.4 lbf ft)
10 Nm (7.4 lbf ft)