Electrical Connectors - ABB GWT C9 Product Manual

2 Product description

2.3.2.1 Electrical connectors

2.3.2.1 Electrical connectors
Principle
The electrical signals from the welding gun transformer, current sensor, temperature
sensor, resolver and motor are transferred through 3 connectors, seen in the image
below.
xx1900001660
The welding power is transferred through the Robifix connector seen in the image
below. For more detail assembly information see separate Product manual for
Robifix,
xx1900001656
Connectors for DressPack LeanID
The 3 circular sockets are prepared for direct connection to the LeanID DressPack.
xx1600000791
A
Continues on next page
26
References on page 7.
R3.CPS: Transformer, current sensor and temperature sensor
© Copyright 2022 ABB. All rights reserved.
Product manual - GWT C9
3HAA010198-001 Revision: A